EVERPLAY Impact Testing
TUV Sud ASTM F3351Testing at 4.25M (14’)
DOWNLOAD PDFTUV Sud ASTM F3351Testing at 4.9M (16’)
DOWNLOAD PDFTUV Sud ASTM F3351Testing at 5.5M (18’)
DOWNLOAD PDFEVERPLAY Fire Testing to ASTM D2859
EVERPLAY EPDM Wear Layer
This test method provides a method of determining the flammability characteristics of textile products when exposed to an ignition source in a laboratory environment. Eight specimens were taken from the sample lot, 230mm X 230mm, and preconditioned in an air circulating oven @ 150°C for 2 hours. After removal from the oven, the specimens are placed into a desiccator for 1 hour prior to performing the test. Each specimen was then placed into the test chamber floor with the pile surface up and a steel frame, 230mm X 230mm with 200mm diameter hole, placed on top of the specimen. A methenamine tablet was placed centrically onto the pile surface. The pill was ignited using a lighted match, with the ignition flame and propagated flame allowed to self-extinguish.
DOWNLOAD PDFEVERPLAY Wear and Mid Layers
This test method provides a method of determining the flammability characteristics of textile products when exposed to an ignition source in a laboratory environment. Eight specimens were taken from the sample lot, 230mm X 230mm, and preconditioned in an air circulating oven @ 150°C for 2 hours. After removal from the oven, the specimens are placed into a desiccator for 1 hour prior to performing the test. Each specimen was then placed into the test chamber floor with the pile surface up and a steel frame, 230mm X 230mm with 200mm diameter hole, placed on top of the specimen. A methenamine tablet was placed centrically onto the pile surface. The pill was ignited using a lighted match, with the ignition flame and propagated flame allowed to self-extinguish.
DOWNLOAD PDFASTM E303 Test for Slip Resistance Wet and Dry
CHAMP TRACK
This test method covers the procedure for measuring surface frictional properties using the British Pendulum Skid Resistance Tester. The British Pendulum Tester is a dynamic pendulum impact-type tester used to measure the energy loss when a rubber slider edge is propelled over a test surface.
DOWNLOAD PDFEVERPLAY
This test method covers the procedure for measuring surface frictional properties using the British Pendulum Skid Resistance Tester. The British Pendulum Tester is a dynamic pendulum impact-type tester used to measure the energy loss when a rubber slider edge is propelled over a test surface.
DOWNLOAD PDF